Friday, January 21, 2011

Pinnacle Studio 14 and the Canon 7D

I have owned both Pinnacle Studio 14, and the Canon 7D for almost a year.  Several months ago, I was creating videos from time lapse captures I made with a webcam. The captures were only 640x480. During the creation of these time lapse videos (http://www.youtube.com/watch?v=EO-dvDwjL-I), I began to notice a problem with Pinnacle.

Standard Defintion

My video source was progressive (non-interlaced) content.  The output video I was getting from Pinnacle was horribly pixelated. The title had jagged edges to it and the video quality was horrible.  After contacting tech-support and trying out all sorts of options with the options dialogs

I learned that in order to get smooth output, I needed to make sure that the codec for background rendering was set to DV.  My output was smooth again.

High Definition
Time passes and I think all is well. Just recently I notice the same sort of jagged interlacing artifacts in some of my high-definition videos.  I try to perform the same settings as shown above for my high definition content, though I have the video set to "Set from first clip added to project". I notice that no matter what I do, I can never get the background rendering codec to use DV. the "Current" codec is always set to MPEG-2.


I then analyze all my projects that I created, and the video output I produced. I noticed 2 things.
  1. When I import a Canon 7D video, shot at 1920x1080x30p and I have the Project Format set to "Set from first clip added to project" that the Current format that is shown is 1920x1080x60i (1920 x 1080, 29.97 frames/sec 16:9, interlaced). Pinnacle Studio sees my progressive content as interlaced.  I have imported the files into other packages (Sony Vegas, EDIUS and a few others) and all they show the video as being progressive.  The camera is supposed to record in progressive.
  2. If I set the format as follows
    the title sequence is no longer appearing interlaced, pixelated and is nice and smooth.
I performed all my analysis using uncompressed AVI output to ensure that the output format and compression was not affecting my analysis.

I examine what I thought was the fixed video, but then a little bit after the title sequence was gone, especially where diagonal lines run, that the jagged pixelated look is still there.  Examining the footage I realized the interlaced/pixelated/jagged part was only fixed for the portion of the clip that was re-rendered with the title. 

Realizing, that re-rendering the video is what removes the interlaced/jagged artifacts, I then added a the RGB colorizer filter (changing no settings) to all the clips.  This removed the interlaced artifacts from the video. Unfortunately this change significantly increases the processing time required to work with the video.  I also noticed some sections, particularly in the dark areas still look pixelated. I have found no good solution for this.


In attempting to generate the sample pictures for this blog, I ran in to some interesting problems and difficulties reproducing the bug. I had to turn off background rendering to get the AVI's to successful export and was not able to get one of them to work reproduce. There still seems to be a element of randomness to whether Pinnacle will produce blocky interlaced/jaggy output or not.

Conclusion
I am still experiencing flakiness in reproducing this bug. Too much really seems to depend on those project settings and how they are set up.  If you look at them wrong, you may or may not get output with interlaced/jagged/pixelated results.  You could open a project one day and it works, and the next time you open it to output its back.

I have decided to seek out better more reliable software. It is quite unfortunate as I really liked the easy of use, and the included transitions/titling effects of Pinnacle's product. The software also had a good set of predefined output formats to choose from that was straight forward.

Comments
If you have Pinnacle Studio 14, and you use it to create videos, please check your footage for these unfortunate artifacts. If you see them as well, please leave comments below.

Sample Pictures

I have two sets of sample pictures. The first set is with the title, the second set is without. To really see the problems you need to view the full size. Click on an image to view its full size.

First Frame - Legend
First Frame - Source



First Frame - With pixelated/interlaced/jagged edges for title and scene.

First Frame - Fixed
 

Second Frame Legend

Second Frame Source
Second Frame Interlaced/Pixelated/Jagged
Second Frame Fixed (only partial, take note of region 2 from the legend).


8 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Thanks for the info this has been driving me crazy hope it works for us

    ReplyDelete
  3. I bought a Panasonic DMC-FZ200 and had always loved Pinnacle 14 in the past. Now my pictures and to a less extent my videos are very pixelated. I thought Pinnacle 17.5 would be better, but I'm not interested in digesting a 400 page manual and learning an entirely new system. Suggestions?

    ReplyDelete
    Replies
    1. I use EDIUS now. Pinnacle was so when working with video with H264 content so I looked to other software to see what was out there. I found EDIUS, video software more popular outside North America and it performs so much better. Unfortunately I think no matter what route you choose, you may have to learn new software.

      I have a video on YouTube comparing multi-cam performance of the various video editors.
      https://www.youtube.com/watch?v=g7G7SgkfbcQ

      Out of the video editors I tried, Media Composer was by far the hardest one to work with. The other video editors all worked in about the same way with some subtle differences.

      Delete
  4. This comment has been removed by a blog administrator.

    ReplyDelete
  5. Thanks for the always useful information. This is great information to help garage type SEO people like me.Pinnacle Studio 21

    ReplyDelete
    Replies
    1. Glad it was still useful in Pinnacle Studio 21. I would have expected a lot has changed since I last used this software.

      Delete
  6. This comment has been removed by a blog administrator.

    ReplyDelete